Accessories / Spare Parts / Service Kits

Related Products:

Workstation Accessories

  • Automated Humidity Control

    Humidity Control PCB

    Ensures excess humidity is removed inside the workstation to ensure optimum cell conditions.

  • Ezee Sleeve Bare Hand System

    Ezee Sleeve

    This unique bare hand system allows quick bare hand access to the samples whilst maintaining the internal atmosphere.

  • Palladium Catalyst

    Palladium Catalyst

    Allows anaerobic or anoxic conditions to be achieved and maintained.

  • Detox

    Detox Kit

    Ensures optimum workstation environment by absorbing all potential contaminants.

  • Petri Dish Holders

    Petri Dish Holders

    Allows between 7, 11 and 14 Petri dishes to be neatly held inside the workstation. Each size of Petri dish holder is available in 7 seven colours to represent the days of the week in a busy lab.

  • Wire Racks

    Allows up to 30 plates to be stored per rack inside the workstation. These can be labelled for identification purposes.

  • Anaerobic Strips

    A quick test to check for anaerobic conditions inside the workstation. Once removed from refrigerated storage, these should be introduced inside the workstation and opened. A change from white to pick in colour indicates perfect anaerobosis.

  • Removable Front

    To allow easy, convenient front loading access, cleaning and service.

  • Internal Mains Socket

    Internal Socket

    To allow small accessories to be powered inside the workstation.

  • Single Plate Entry System

    Single Plate Entry

    To allow the direct introduction of individual plates into the workstation without the need for the interlock cycle.

  • Ultrasonic Humidity Control

    Allows the introduction and removal of humidity into the workstation for perfect cell conditions. Ideal for users working with a small number of plates inside the workstation or for those directly concerned with the effect of humidity on experimental conditions.

  • Cable Gland Port

    Allows the passage of cables through the workstation wall without altering the internal working conditions.

  • Vacuum Line Port

    Vacuum Connector Port

    Allows the attachment of a vacuum line used to remove waste media from plates without removing them from the anaerobic / hypoxic conditions of the workstation.

  • Trolley

    Ideal to support the workstation where bench space is at a premium.

  • Data Logging Connection

    Allows the user to monitor the temperature of the workstation via a software programme linked to a PC.

  • Power Failure Back Up System

    Maintains the anaerobic environment of the workstation if there is a mains power failure.

  • Gas Low Alarm

    To alert user of gas requirements.

  • Excess Gas Use Alarm

    To alert the user to possible gas leak on workstation.