Sci-tive N

  • Overview

    Sci-tive N

    Sci-tive has been designed to mimic in-vivo conditions providing a continuous cell culture environment which eliminates cellular stress linked to variations in temperature, pH and oxidation yielding better stem cell lines.

    Features and Benefits

    • 'Lab in a Box' - a Complete Closed Cell Culture Workstation

    • Offers very stable, user defined O2, CO2, temperature and humidity control

    • Large 390 litre incubated working area (1.17m wide x 0.57m deep x 0.59m high) allows incubation, passaging, media transfers and cell culture

    • Large pass through interlock ( > 11 litres capacity) easily holds a variety of flasks, dishes and tubes

    • Built in Hepafiltration system for both main Workstation and Interlock complies with:

      • Class 5 (ISO 14644-1)
      • Class 100 (FED 209E)
      • Grade B (EU TCD 2004/23/EU)

    • Direct-Hand Access into Workstation, using simple Ezee Plug system, takes seconds!

    • Fully expandable, with options to upgrade to Dual Workstation Model

    • Early results for Mesenchymal Stem Cell expansion reveals:

      • Optimised frequency of CFU isolation
      • Optimised Cell numbers (per flask)
      • Reduced variability across cells recovered
      • Reduced transcriptional alteration

  • Specifications

    Workstation Fabrication

    • Solvent Bonded Acrylic

    Bench Space Requirements

    • Height (excluding stand): 1024 mm
    • Width (side to side): 1650 mm
    • Depth: 760 mm

    Internal Workstation Dimensions

    • Height: 590 mm
    • Width: 1170 mm
    • Depth: 555 mm

    Workstation Weight

    • Weight approx: 230kg

    Alarms

    • Temperature: Visual and Audible
    • Humidity: Visual
    • Gas Low Pressure: Visual and Audible

    Interlock Dimension

    • Height: 210 mm
    • Width: 270 mm
    • Depth: 200 mm

    Atmosphere Control

    • Temperature: Ambient +5°C - 45°C
    • Humidity Control: Ambient-85% RH
    • O2 Control: 0.0%-20.9%
    • CO2 Control: 0.0%-30.0%
    • Integrated HEPA Filtration System
    • Activated Carbon Filtration System
    Capacity Checker

    Use the Capacity Checker to compare how many Plates/Flasks/Dishes fit into each Workstation

  • Accessories

    Standard Accessories

    Workstation

    • Stand
    • 2 Racks with Perforated Shelves to Optimise Homogeneity
    • Direct-hand Access using Ezee Sleeve™ and Ezee Pleez System
    • Removable Front with UV Filtration Screen
    • Waste trays
    • Gas tight waste port
    • 3 electrical power sockets

    Gas Control Software

    • USB Communications Port
    • 7 Days Continuous Storage of Event Log Data
    • One Touch Calibration (O2)
    • On-Screen Fault Assistance

    Optional Accessories

    • Cable Gland Port to allow the passage of cables through the workstation wall without altering internal conditions
    • Vacuum Line Port to allow the attachment of a vacuum line used to remove waste media from plates and dishes without removing them from the hypoxic conditions inside the workstation
    • Gas Sample Port to enable samples of the Workstation atmosphere to be checked
    • Palladium Catalyst if anaerobic environment is required
    • Anaerobic Indicator Strips to check anaerobic state of internal environment if required
    • Gas Tank Regulators
    • Gas Tank Filter Modules
    • Vibration Isolation Platform designed to minimise vibration originating from the Workstation or Laboratory Floor; can be used for vibration free incubation of microtitre plates, dishes or flasks
    • Adjustable incubation tray so that any micro-titre plates, flasks or dishes are kept absolutely level during incubation
    • Adjustable chair
    • Remote Monitoring Module allows users to be alerted by text message when gas pressure of O2 and gas pressure of CO2, temperature or humidity levels are out of specification
    • Choice of "Free Flow" incubation racks:
      1: 150mm deep x 220mm tall x 460mm wide
      2: 150mm deep x 320mm tall x 290mm wide
    • Gas Level Verification Meter (Geotech 100) designed to monitor CO2, and O2 inside Ruskinn Workstations, works under high humidity
    Find accessories for this product

    Find accessories for Ruskinn Workstations

  • Gallery

  • Videos

    • Start of the Day

    • Changing O2 and CO2 values on SCI-tive Gas Mixer

    • Using Juli inside SCI-tive

    • Loading interlock from the outside on SCI-tive

  • Downloads

    Downloads

    Links